Venturi valve and Venturi tube are metal products formed by numerical control processing technology. They use the Venturi effect in principle. In the field of spinning processing, the Venturi valve's pipe products and Venturi's forming process are different. The Venturi valve's tube fittings use the tube spinning closing process, while the Venturi valves are spun using sheet metal.
1. Venturi valve
Venturi valve tubes are made by pipe spinning. The blank is a welded tube. By spinning and closing, the fixture design of Venturi valve processing is more important, otherwise vibration will occur during the spinning process. During the forming process, the welded pipe is prone to local cracking and ellipse. Venturi valves generally have a diameter of about 200-400mm and a height of more than 500mm. Generally, the equipment market has insufficient tool holder machining stroke and tail top stroke, resulting in insufficient mold release stroke after processing. Due to the large size of the venturi valve, the spinning process has more problems, especially the stainless steel venturi valve is more difficult to spin.
2. Venturi valve body
The curve of the venturi valve's bile body needs to be controlled uniformly. The spinning of the venturi valve body is more difficult than the venturi valve body.
3. stainless steel venturi
Spinning of venturi tube with iron is difficult to manufacture. Due to the poor elongation of stainless steel and high tensile strength, stainless steel venturi tube is easy to crack at the bottom and flange of the forming process. When making stainless steel venturi tube, The rigidity of the equipment is particularly important, and it is not possible to give up the knife. In addition, the four-position tool holder is easy to break during the processing of the venturi tube. It is best to use a six-position tool holder.
The flange flatness of stainless steel venturi tube is generally required. Due to the stress rebound of stainless steel material, the flange surface will be uneven, and the taper of the mold needs to be repaired to overcome the material stress.
