Application of CNC Spinning Machine in Concrete Mixer

Concrete was first invented and manufactured by the British, so it is inferred that concrete mixers were also invented by the British.So how was the concrete mixer produced? It is a CNC spinning machine.Our CNC spinning machine greatly reduces the processing cost and equipment investment cost, using advanced combination of tire tooling, production without a large number of molds, can save a lot of money for the producer, but also save a lot of material resources for making molds,

The concrete mixer appeared in the period of time in the form of self-falling mixing. With the increasing demand for concrete, the forced mixer emerged. Forced mixers can be divided into two types: vertical shaft and horizontal shaft. Almost all domestic mixers are of these two forms.

Self-falling mixers can be traced back to the early 20th century. drum-type concrete mixers, driven by steam engines, had started to appear in the early 20th century. In the next fifty years, the reverse discharge type and tilting discharge type of double cone mixer and cracked cylinder mixer were introduced and developed one after another.

Since the self-falling concrete mixer is mainly to mix plastic concrete, so the forced mixer began to rise. From the early 1950s after the rise of the forced mixer has been the rapid development and promotion. The first to appear is the disc vertical shaft type forced concrete mixer. This mixer is divided into vortex paddle type and planetary type two.

Single horizontal shaft mixer is made in Germany has the advantages of compact structure, low power consumption, good wear resistance of the blade liner, can start at full load and the ability to mix light concrete. China also introduced the prototype to the company. Double horizontal shaft mixer is a new model gradually developed with the improvement of the concrete construction process. Foreign from the late 1940s began to appear in the United States and Germany, but its development was basically at a standstill due to the immaturity of the shaft end seal technology.

Until the early seventies, due to this technology breakthrough, double horizontal shaft mixer in many countries right to redevelop, has formed a series of products. China was successfully developed in the early 1980s, but the rapid development of product specifications and the number of products, are far more than other models.

Our CNC spinning machine from the performance of the large hydraulic equipment to solve the large weight of the mold, difficult to change the tire, high processing costs, spinning the parts of high finish, no deformation, no oval, workpiece pre-stress to improve the parts after forming poor finish, impeller torsion, balance difficulties, with stable operation, small investment, reliable performance, wide range of use, high labor efficiency, product once continuous forming, etc., is the ideal choice for fan enterprises, is a fundamental breakthrough in the fan spinning processing technology.

Since 1984, Mr Su established a processing base in Shanghai that produced engine components and missile headshells, and he accumulated rich experience in spinning technology. In the production, Mr Su found that the old-fashioned spinning technology could not be integrated and was unable to reduce the welds of the parts. For all difficult-to-deform materials, it also needed to be machined after forging, and the material utilization rate could only reach 3%. Perfectly combine modern robots, laser cutting and spinning machines to achieve a truly unmanned workshop production line.

CNC spinning machine supplier cherishes responsibility and integrity. Mr Su said that the machine manufacturing industry should not only provide cost-effective machines but also provide high-quality services. You can hand over the problems of spinning to us, and even the company will provide new product designing and processing services to help you save time and money on new product development.